Lexmark 2480 manual Control menu options, Using Setup mode

Control menu options

Using Setup mode

Control options

Use these menu
options	When you want to…
Uni-Dir Printing	Customize the direction of print.
	• Set to On and in NLQ mode, the printer prints
	unidirectionally by line.
	• Set to Off, the two passes are printed bidirectionally except
	Proportional Spacing, which is still printed unidirectionally.
	• The factory setting is Off.
Auto Ready Cut Sheet	Customize how the printer goes to Ready after a cut sheet is
	loaded.
	• When set to On, the printer automatically goes to the
	Ready state after a cut sheet is loaded into the printer.
	• When set to Off, the printer remains offline after a cut
	sheet is loaded. Press Start/Stop to put the printer in the
	Ready state.
Paper Out Alarm	Set the printer to alarm or not.
	• When set to Enable, the alarm sounds when the printer runs
	out of paper. The factory setting is Enable.
	• When set to Disable, the alarm does not sound.
Demo Print	Enable or Disable the printers ability to print the Demo page.
	For instructions to print the Demo page, see “Printing the
	demonstration sample” on page 10.
Menu Language	Select the language you want your menus to print in. The
	menus can appear in one of the following languages: English,
	French, German, Italian, Spanish and Brazilian Portuguese.
	To view the list of steps, see “Example: Changing the menu
	language setting” on page 92.
TOF Read	Have the printer verify the Top-Of-Form before it begins
	printing continuous forms.
	For help see, “Setting Top-Of-Form” on page 81.
Quiet	Change the noise level of your printer by putting it in Quiet
	mode. The printer prints slower in Quiet mode.

102