Lexmark 2480 manual Micro ↓, Setup, Pitch

Operator panel

Layer 2 operator panel buttons (continued)

Press this button:	When you want to…
Micro ↓	Feed the paper downward in:
	•	1/72-inch increments (2480/2481
		models)
	•	1/90-inch increments (2490/2491
		models)
		If you press and hold the Micro ↓
		button, the paper advances in micro
		movements and then goes into
		continuous feed.
	Use Micro ↓ to adjust the
	Top-Of-Form.
Setup	Enter Setup mode to change the
	default values and modes for printer
	operation.
Pitch	Set the character pitch to: 10, 12, 15,
Notes:	17, 20 cpi, or Proportional Spacing.
• Repeatedly pressing	Notes:
the Pitch button	• On 2490/2491 models you can also
rotates through the		select 24 cpi.
printer pitch	• Fast Draft supports only 10, 12, and
selections. If you
		15 pitch.
continue pressing
Pitch through a
second pass the pitch
selections are locked.
• This setting will be
lost when the printer
is powered Off and
back On.

Note: Some functions may not work when data is being pro- cessed and the printer is online (Ready light is On).

26