
Printer status | (continued) |
| |
Operator panel |
| ||
lights/status |
| Action required | |
|
|
| |
Power | Off | Check the power cord and power source. If the | |
|
| power light remains Off, contact your service | |
|
| representative. | |
|
|
| |
Power | On | The paper select lever has been changed while paper | |
Ready | Off | was loaded. Move the paper select lever back to | |
Paper Out | Blinking | correct position and press Start/Stop. | |
Panel Lock | Blinking | Note: Make sure paper is parked or unloaded | |
|
| ||
|
| before changing the position of the paper select | |
|
| lever. | |
|
|
| |
Power | On | 1 Open and close the operator panel. | |
Ready | Blinking | 2 If you are attempting to perform a button | |
Paper Out | Blinking | power On sequence, verify you are holding | |
Panel Lock | Blinking | the correct button. | |
3 Power printer Off and back On with no | |||
|
| ||
|
| buttons held down. | |
|
| 4 If error continues, call for service. | |
|
|
| |
Power | On | Insure Tractor 2 option is install correctly. For | |
Ready | Blinking | instructions, see the Tractor 2 manual that came with | |
Paper Out | Blinking | your option. | |
Tractor 2 | Blinking |
| |
|
|
|
119
Troubleshooting