Printer problems (continued)
Problem | Probable cause | Action |
|
|
|
The Auto Sheet Feeder | The weight of the paper | Remove all paper from the |
feeds paper at an | is too great. | Auto Sheet Feeder and use |
incorrect rate. |
| paper that has a lower |
|
| weight. See the optional Auto |
|
| Sheet Feeder manual for |
|
| recommended paper weights. |
|
|
|
| Paper is jammed in the | See “Paper fed from Auto |
| Auto Sheet Feeder. | Sheet Feeder jams at entrance |
|
| to printer.” on pag e136. |
|
|
|
| The forms thickness lever | Adjust the forms thickness |
| is set incorrectly for the | lever. See “Setting the forms |
| type of paper you are | thickness lever” on page 44 |
| using. | for more information. |
|
|
|
| Too much paper loaded. | Remove some of the paper. |
|
|
|
The Auto Sheet Feeder | See the optional Auto Sheet | |
places the paper at the | incorrectly. | Feeder manual for |
wrong |
| information in setting |
position. |
| |
|
|
|
| The paper is too short. | Remove the paper and ensure |
|
| that the paper meets the |
|
| paper specifications. See the |
|
| optional Auto Sheet Feeder |
|
| manual for paper |
|
| specifications. |
|
|
|
| Dirty auto sheet feed | For help, see “Cleaning the |
| rollers. | Auto Sheet Feeder rollers” on |
|
| page 143. |
|
|
|
Troubleshooting
