
7Set the forms thickness lever to the proper setting for the type of paper you are using.
See “Setting the forms thickness lever” on page 44.
Continuous forms jams
1Turn the printer Off.
2Detach any continuous forms already printed.
3Set the forms thickness lever to position 7.
4Tear the continuous forms off at the perforation line before the forms enter the printer.
5If using the tractor in the push position, open the front cover. (Skip this step if you are using the optional Tractor 2 Feeder.)
6Open the left and right tractor doors.
7Lift the paper away from tractor pins.
8Carefully pull out the paper.
9Remove the ribbon access cover to clear any torn paper.
10Remove any torn perforation strips or bits of paper from the paper path.
127
Troubleshooting