Lexmark 2480 manual Setting printer to default settings, Initialize printer to US defaults

Setting printer to default settings

To reset the printer to the factory defaults:

Initialize printer to US defaults

The standard defaults for the United States are:

•Code page: 437

•Character Set: 1

•Form length: 11”

To change the defaults:

1Make sure paper and the ribbon cartridge are installed.

2Turn the printer Off.

3Open the ribbon access cover.

4Move the printhead over toward the operator panel side of the printer until it stops.

5Close the ribbon access cover.

6Press and hold Tear Off + Load/Unload while you turn the printer On.

7Continue holding these buttons until the carrier moves.

Note: The operator panel lights blink On and Off several times.

Once the carrier moves, your settings have been reset to factory defaults.

121

Troubleshooting