Lexmark X215 MFP Sending a fax manually, Using the ADF, Using the scanning bed

Using the ADF

1Place your document into the ADF.

2Customize any fax settings you want to change. For help, see page 54.

3Using the numeric keypad, enter the number of the fax machine to which you want to send your document.

Note: You may enter a number using shortcuts or groups. For help, see page 58.

4Press Start.

Note: Pressing Stop/Clear cancels the faxing process.

Sending a fax manually

Because the Manual mode is often used when the phone line is shared between a telephone and the fax machine, there may be times when the fax recipient mistakenly answers the telephone rather than connecting the fax machine. If this happens, inform the recipient you are attempting to send a fax, ask them to hang up the telephone, and then resend the fax. When you connect with the receiving fax machine you should hear a high-pitched fax signal.

Using the scanning bed

1Make sure there are no documents loaded in the ADF.

2Place the first page of your document on the glass.

3Customize any fax settings you want to change. For help, see page 54.

4Press the telephone icon button to get a dial tone.

5Using the numeric keypad, enter the number of the fax machine to which you want to send your document.

Note: You may enter a number using shortcuts or groups. For help, see page 58.

6When you hear a high-pitched fax signal, indicating a connection with the receiving fax machine, press Start.

The operator panel prompts you for another page.

7Using the keypad, press 1 (for yes) if you have more pages, or 2 (for no) if you have finished scanning the entire document.

Note: Pressing Stop/Clear cancels the faxing process.

Sending a fax manually

52