50
Contacts
Tip:Pres s A under Browse to select a name
already in Contacts.
3If you want to assign a ring tone or pict ur e to th e
entry, select [Ring Tone/Picture]. See
“Assigning a Ring Tone or Picture”.
4To assign a Contacts type to the number or
address being stored:
Select the Contacts type fiel d.
Select the Contacts type you want to assign.
5To store a number or address:
Select the # field (or ID for an email address, or
IP for an IP address).
Enter the number or addr ess. For phone
numbers, use the 10-digit format. For email
addresses, see “En tering Text” on pa ge 45.
Tip:Pres s A under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press O.
6If you want to change the default Speed Dial
number or a create a voice name for the entry ,
select [Options]. See “Assigning a Speed Dial
Number or Voice Name” on page 51.
7If you want to add more numbers or addresses
to the entry:
Scroll past the inform ation you already entered.
Enter the additional informati on for the entry
using step 3 throu gh step 6. You mus t assign a
name to the entry, if you have not already.
8Press A under Save.
Assigning a Ring Tone or Picture1If you have not already, select [Ring
Tone/Picture].
2If you want to assign a ri ng tone from the list of
ring tones:
With Ringer highlighted, scroll left or right to
choose a ring tone . -or-
Select Ringer. Select the ring tone you want to
assign.
3If you want to assign a picture from the media
center:
Scroll to Picture. Scroll left or right to choose a
picture. -or-
Select Picture. Select the picture you want to
assign.