Replacing the Battery
Notice: Observe static precautions. Use an antistatic wrist strap.
1.Power off the system and remove the left side panel as described earlier in this chapter.
2.To gain access to the battery, remove the processor boards, refer to Removing the Processor Board earlier in this chapter.
3.Using your finger nail or a small pointed tool, gently push to the left on the right edge of the battery and pry the battery out of its socket. Refer to Figure
4.Orient the new battery over its socket so the plus
(+)sign on the battery is facing up.
5.Carefully insert the left side of the battery into the socket connectors and gently push the battery into the socket.
6.Press down on the battery until it is firmly seated in its socket.
7.Reinstall the processor boards that were removed in step2, refer to Installing the Processor Board earlier in this chapter.
8.Replace the side panel and turn on the system.
9.Run the BIOS Setup or SCU to restore configuration settings to the
