Packard Bell MH4000 manual System Configuration Utility Main Menu, Menu Options Description

4-4

		Table 4-1. System Configuration Utility Main Menu
	MENU OPTIONS	DESCRIPTION
1.	Learn about configuring	Provides basic instructions on system configuration and using the Help
	your computer	program.
2.	Configure computer	Lists automatically detected boards, and enables manually adding, moving
		and removing boards. Plug-and-Play and EISA boards provide their own
		configuration files. If you have previously defined ISA boards or their
		configuration files, use “Add or remove boards” for a menu to enter or
		change ISA board configurations. (Refer to ISA Board Configuration found
		later in this chapter).
		INSERT adds a board not detected or has not been installed.
		DEL removes a selected board.
		F7 moves a selected board to a different slot.
3.	Set date	Enables viewing and changing the date that the computer uses.
4.	Set time	Enables viewing and changing the time that the computer uses.
5.	Maintain system	Enables viewing and changing Configuration (.CFG) files and System
	configuration diskette	Configuration Information (SCI) files.
6.	Exit from this utility	Exits from the SCU.

7. Select Learn about configuring your computer from the SCU Main Menu and press ENTER if you need information on system configuration. Read through the information and press the F10 key when you are done.

8. Using the − and ↓ arrows highlight Configure Computer and press ENTER. The System Configuration Utility Menu shown in Table 4-2 displays. The keys that are active while viewing a screen are displayed on the bottom of the screen.

Note: Press the F1 key at any time for help and additional information on each option. To return from help, press the ESC key.

9. Select Step 1: Important System Configuration information and press ENTER to learn more about the System Configuration Utility.

10. Select Step 2 to add an ISA board to your system. Refer to “ISA Board Configuration” in this chapter.

Configuring Your System