Packard Bell MH4000 manual Problem Solving

6-23

		Table 6-3. POST Tests (continued)
Code	Beeps	POST Routine Description
40	2-1-1-1	Set Initial CPU speed
42	1-1-1-3	Initialize interrupt vectors
44	2-1-2-1	Initialize BIOS interrupts
46	2-1-2-3	Check ROM copyright notice
47	2-1-2-4	Initialize manager for PCI Option ROMs
48	2-1-3-1	Check video configuration against CMOS
49	2-1-3-2	Initialize PCI bus and devices
4A	2-1-3-3	Initialize all video adapters in system
4C	2-1-4-1	Shadow video BIOS ROM
4E	2-1-4-3	Display copyright notice
50	2-2-1-1	Display CPU type and speed
52	2-2-1-3	Test keyboard
54	2-2-2-1	Set key click if enabled
56	2-2-2-3	Enable keyboard
58	2-2-3-1	Test for unexpected interrupts
5A	2-2-3-3	Display prompt “Press F2 to enter SETUP”
5C	2-2-4-1	Test RAM between 512 and 640K
60	2-3-1-1	Test extended memory
62	2-3-1-3	Test extended memory address lines
64	2-3-2-1	Jump to User Patch1
66	2-3-2-3	Configure advanced cache registers
68	2-3-3-1	Enable external and CPU caches
6A	2-3-3-3	Display external cache size
6C	2-3-4-1	Display shadow message
6E	2-3-4-3	Display non-disposable segments
70	2-4-1-1	Display error messages
72	2-4-1-3	Check for configuration errors
74	2-4-2-1	Test real-time clock
76	2-4-2-3	Check for keyboard errors
7C	2-4-4-1	Set up hardware interrupt vectors
7E	2-4-4-3	Test coprocessor if present
80	3-1-1-1	Disable onboard I/O ports
82	3-1-1-3	Detect and install external RS232 ports
84	3-1-2-1	Detect and install external parallel ports
86	3-1-2-3	Reinitialize onboard I/O ports

Problem Solving