Packard Bell MH4000 manual SCU Configuration Settings, SCU Configurations

4-6

SCU Configuration Settings

Table 4-3 shows the recommended settings for the SCU and provides a place for you to record any changes you make to these settings. To view and/or change SCU Configuration settings, select Step 3 under the System Configuration Utility Menu. Once you have selected step 3, you can press the F7 key to display further server specifications.

Table 4-3. SCU Configurations

PARAMETER	NORMAL SETTING	YOUR CONFIGURATION
Flexible Disk Drives
Embedded Controller*	Primary**
Flexible Drive A*	1.44 MB (3.5 - inch)
Flexible Drive B*	Not Installed
Dual Serial Ports
Serial Port 1*	3F8, IRQ 4**
Serial Port 1*	2F8, IRQ 3**
Parallel Port Configuration
Parallel Port*	378, IRQ 7**
Parallel Port Mode*	Bi - directional mode
ESM ASIC IRQ
ESM ASIC IRQ*	IRQ13**
Mouse	Enabled
SCSI ch0 - PCI SCSI Controller
PCI Function 1*	Enabled**
SCSI ch1 - PCI SCSI Controller
PCI Function 1*	Enabled**
VGA - PCI VGA Controller
PCI Function 1*	Enabled**
Standard VGA Resources	Enabled**

*Press ENTER for Menu

**Press F6 to Edit resources

Configuring Your System