5-36

Power Supply Module

The following sections provide procedures for removing and installing a power supply module.

Removing a Power Supply Module

If the amber LED on a power supply module is lit, the power supply module can be hot swapped. If the amber LED on a power supply module is not lit, it is recommended that power to the system be turned off, before removing the power supply module.

To remove a power supply module, perform the following steps (see Figure 5-14).

1.Press the locking clip on the release-handle with your thumb.

2.Pull the release-handle with your index fingers.

3.Remove the power supply module.

Figure 5-14. Removing a Power Supply Module

Press

In

Clip

Pull

Lever

Down

Upgrades and Options

Page 120
Image 120
Packard Bell MH4000 manual Removing a Power Supply Module