SCSISelect Configuration Settings
The following keys are active for all SCSISelect screens:
KEY | ACTION |
|
|
Arrows | Up and down arrows move from one parameter to |
| another within a screen. |
ENTER | Displays options for a configurable parameter. |
| Selects an option. |
ESC | Moves back to previous screen or parameter or |
| EXIT if at the Main menu. |
F5 | Switches between color and monochrome. |
F6 | Resets to host adapter defaults. |
Table
Table 4-6. SCSISelect Setup Configurations
| RECOMMENDED SETTING | YOUR |
OPTION | OR DISPLAY ONLY | CONFIGURATION |
SCSI Bus Interface Definitions |
|
|
Host Adapter SCSI ID | 7 |
|
SCSI Parity Checking | Enabled |
|
Host Adapter SCSI Termination | Enabled |
|
Additional Options |
|
|
Boot Device Options | Press ENTER for menu |
|
Boot Target ID | 0 7 |
|
Boot LUN Number | 0 |
|
SCSI Device Configuration | Press ENTER for menu |
|
Initiate Sync Negotiation | Yes |
|
Maximum Sync Transfer Rate | 40.0 4 |
|
Enable Disconnection | Yes |
|
Initiate Wide Negotiation | Yes |
|
Send Start Unit Command | Yes 1 |
|
Include in BIOS Scan | Yes 1 |
|
Advanced Configuration Options | Press ENTER for menu. |
|
Reset SCSI Bus at IC Initialization | Enabled |
|
1No effect if BIOS is disabled.
2Do not remove media from a removable media drive if it is under BIOS control.
4Set to 40.0 for AIC7880 or 10.0 for AIC7860.
7Set to 0 for AIC7880 or 5 for AIC7860.
Configuring Your System
