Figure 5-24. Adding Blank Panel Tray
POWER
RESET
POWER
STATUS
DISK
Installing blank panel tray
ABlank panel tray
BTwo screws that secure the blank panel tray
12.Push the blank panel tray into the bay until the screw holes of the side rails are directly in front of the chassis screw holes and secure with the screws previously removed (Figure
13.Reinstall the front plastic cover, the side cover, and power on the system.
14.Power on the system and remove the drive serial number from the equipment log. It may be necessary to run the SCU as described in the Configuring Your System chapter.
