Problems with Application Software
If you have problems with application software, perform the following:
■Verify that the software is properly configured for the system. Refer to the software installation and operation documentation for instructions on setting up and using the software.
■Verify a different copy of the software to see if the problem is with the copy you are using.
■Make sure all cables are installed correctly.
■Verify that the system board jumpers are set correctly. Refer to the Configuring Your System chapter for jumper settings.
■If other software runs correctly on the system, contact your vendor about the failing software.
If the problem persists, contact the software vendor's customer service representative for assistance.
