Features

2-7

FDC power switch (convex button)

GReset switch (concave button)

HPower-on LED, green

ISystem alarm LED

JDrive activity LED

KLCD panel

LSCSI drive status LEDs

Press to turn system DC power on or off.

Press to cause a hard reset to the system; the power-on self test (POST) will run.

When green, power is present in system (+5 and +12 VDC). When off, power is turned off or power source is disrupted. See Table 2-1 for a list and description of the LED system status indicators.

When green the system is OK. See Table 2-1 for a list and description of the LED system status indicators.

When green, internal disk drives are being accessed. See Table 2-1 for a list and description of the LED system status indicators.

Displays information about processor type and system failures (error and diagnostic information).

Left to right: Drive present/power on; drive active; drive faulty. Each drive has three LEDs visible above the bay from the front. See Table 2-2 for a list of SCSI disk drive status LED indicator descriptions.

Packard Bell MH4000 manual Features

Models: MH4000