Figure A-4. Rerouting the Ultra Wide SCSI Cable
Configuring the RAID Controller
The DACCF utility is included with the RAID controller. This configuration utility allows you to configure your disk array before installing your network operating system. The DAC960PDU RAID controller supports various versions of RAID technology (referred to as RAID levels). To use any RAID level, you must configure the RAID controller using the DACCF configuration utility prior to installing your Network Operating System. For an explanation of this utility, refer to the DACCF Utilities Installation Guide and User Manual that was shipped with the server. Chapter 2 of the manual
(Configuration Strategies) describes RAID technology and provides tips on making your array perform well in your specific application. Chapter 3 (Preparing the Array) covers array hardware preparation, configuration, and initialization. After completing the steps in chapter 3, you can install your Network Operating System.
System Cabling
