Packard Bell MH4000 manual Table B-1. Memory Configurations, Bank installation, Dimm type

B-2

Bank installation

Always begin with the top DIMM sites (P3 and P11) as you fill the sockets.

All DIMMs in a bank must be identical size. DIMMs may differ in size from bank to bank. Number of DIMMs supported: 2, 4, 8, 12, or 16.

DIMM type

Use only 72-bit, 168-pin, fast page mode DIMMs with gold plated edge connectors, single- or double-sided.

Use JEDEC-compatible DIMMs. Contact customer service representative for list of approved DIMMs.

Table B-1 lists the distribution of DIMMs for system memory configurations that maximum socket availability, other combinations are possible.

Table B-1. Memory Configurations

Total	Interleave	Bank #0	Bank #1	Bank #2	Bank #3
Memory	Type
64MB	two-way	2 x 32MB (P3 +
		P11)
128MB	four-way	4 x 32MB (P3,
		P11, P4 + P12)
256MB	four-way	4 x 64MB (P3,
		P11, P4 + P12)
256MB	four-way	4 x 32MB (P3,	4 x 32MB (P5,
		P11, P4 + P12)	P13, P6 + P14)
384MB	four-way	4 x 64MB (P3,	4 x 32MB (P5,
		P11, P4 + P12)	P13, P6 + P14)
512MB	four-way	4 x 128MB (P3,
		P11, P4 + P12)
512MB	four-way	4 x 64MB (P3,	4 x 64MB (P5,
		P11, P4 + P12)	P13, P6 + P14)
640MB	four-way	4 x 128MB (P3,	4 x 32MB (P5,
		P11, P4 + P12)	P13, P6 + P14)
768MB	four-way	4 x 128MB (P3,	4 x 64MB (P5,
		P11, P4 + P12)	P13, P6 + P14)
1024MB	four-way	4 x 256MB (P3
		P11, P4 + P12)
1024MB	four-way	4 x 128MB (P3,	4 x 128MB (P5,
		P11, P4 + P12)	P13, P6 + P14)

Memory Configurations