Packard Bell MH4000 manual Powering On Your System

3-6

Powering On Your System

1.Make sure all external devices, such as a video display, keyboard, and mouse (optional) have been connected, and the power cords are connected.

2.Power on the video display and any other external devices.

3.Press the push-button power on/off switch on the front panel. Verify that the power-on LED is lit. If it is not lit, ensure the ac power cords are connected to a functional ac power source.

After a few seconds your system begins the internal Power-On Self Tests (POST). POST automatically checks the system board, CPU module, memory, keyboard, and most installed peripheral devices.

If you have problems powering on your system, refer to

Problem Solving in Chapter 6 of this User’s Guide.

After you have successfully powered on your system, refer to Configuring Your System in Chapter 4 of this User’s Guide.

Setup