4-22

Figure 4-1. Function Select Switches

A

1 2 3 4

ON DIP

Function Select Switches and Dump Button

AFunction select switches

BReserved

B

Situations that require changing switch settings include using an optional uninterruptible power supply (UPS) unit.

Note: The switches are set correctly at the factory for your system configuration. If your system requires a switch change, change only the switch setting for that condition. Otherwise keep the switches at their factory settings.

Table 4-7 shows the switch configurations and functions. Set the switches per Table 4-7 and the following steps.

To change a switch setting, use the following procedure.

Note: Power must be completely off before setting the switches, otherwise the settings will not be recognized.

1.At the front of the server, press the Power switch off.

2.At the rear of the server, press the Main Power switch off.

3.At the rear of the server, locate the Function Select DIP switch (see Figure 4-1) that you want to change.

Configuring Your System

Page 74
Image 74
Packard Bell MH4000 manual Function Select Switches and Dump Button