Packard Bell MH4000 manual Using the SCSISelect Utility, Bus Device Selected Scsi Adapter

4-18

Using the SCSISelect Utility

To run the SCSISelect Utility, perform the following procedure:

1.Power-on the system. The system boots up.

2.During initialization, press CONTROL +A. The SCSISelect Utility starts. When SCSISelect detects more than one AIC-78xx host adaptors, it displays a selection menu listing the bus and device number of each adapter. When the selection menu appears, select the channel you wish to configure as follows:

Bus : Device	Selected SCSI Adapter
00 : 08h	AIC7880
01 : 06h	AIC7860

3.Once you select the adapter, the following screen is displayed:

SCREEN	DESCRIPTION
Configure/View Host Adapter	Configure host adapter
Settings	and device settings.
SCSI Disk Utilities	The utility scans the SCSI
	bus for SCSI devices,
	reports a description of
	each device. Run these
	utilities before configuring
	SCSI devices.

4.If you wish to format a disk, verify disk media, or display a list of devices and their SCSI IDs, select “SCSI Disk Utilities”. If you wish to configure the adapter or a device, select “Configure/View Host Adapter Settings”.

Configuring Your System