Glossary

 

 

A

 

AC

(Alternating Current) The type of current available in wall

 

outlets. All computers must convert alternating current to direct

 

current to operate. See also DC.

address

A label, name, or number that identifies a location in computer

 

memory.

ASCII

(American Standard Code for Information Interchange) A

 

standard number assigned to each of the alphanumeric

 

characters and keyboard control code keys to enable the transfer

 

of information between different types of computers and

 

peripherals.

B

 

backplane slot

A connector on the backplane board in desktop computers and

 

expansion boxes that allows you to install circuit cards.

backup

A copy of data for safe-keeping. The data is copied from computer

 

memory or disk to a floppy disk, magnetic tape, or other media.

backup battery

The battery in your computer that maintains the real-time clock

 

and the configuration information when the computer's power is

 

removed.

base memory

An area of memory between 0 and 640 kilobytes.

baud rate

The speed with which data is transmitted during serial

 

communication. The computer's operating system and software

 

program must be configured for the same baud rate as the

 

communication device, such as a serial printer. See also bps.

BIOS

(Basic Input/Output System) A program stored in flash EPROM

 

or ROM that controls the keyboard, disk drives, video monitor,

 

and other devices. See also flash EPROM, EPROM, and ROM.

bit

Derived from BInary digiT, a bit is the smallest unit of

 

information a computer handles. See also byte.

boot

The process of loading the operating system into memory.

bps

(bits per second) The number of bits transferred in one second

 

during serial communication, such as modem transmission.

byte

A group of eight bits.

Glossary

Page 195
Image 195
Packard Bell MH4000 manual Glossary