Polycom 1725-16843-001 manual Ending Calls, Using a Headset, Enabling Headset Memory Mode

Calling and Answering Using the Basic Features of Your Phone

Ending Calls

To end a call:

>>Do one of the following:

—Tap the End Call soft key.

—If you’re in handset mode, replace the handset.

—If you’re in speakerphone mode, press .

—If you’re in headset mode, press .

Your system administrator may have set up your phone so that you can end calls by tapping the Line Key. If your phone is set up to do this, you can end an active call by tapping the Line Key associated with the call.

Using a Headset

If you use a headset, you can set up your phone so that all calls use your headset. You can also use the hookswitch button on your headset to place, answer, and end calls.

Enabling Headset Memory Mode

For a list of supported headsets, see Technical Bulletin 37477, SoundPoint IP and Polycom VVX 1500 Headset Compatibility List, at http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu b.html.

This feature is useful for permanent or full-time headset users. You can set up your phone so that all incoming and outgoing calls use your headset. At any time, you can switch to handset or speakerphone mode.

To use Headset Memory Mode, you must enable, and then activate, Headset Memory Mode. If you switch to handset or speakerphone mode, you deactivate Headset Memory Mode. To switch back to Headset Memory Mode, you must activate it again.

Polycom, Inc. 39