| Reference Information |
|
|
Switch Agent : | Allows a network management station to |
| obtain configuration values, traffic |
| information, and failure data pertaining to |
| the Fibre Channels via SNMP through the |
| Ethernet interface. |
TFTP: | Trivial File Transfer Protocol (TFTP)— |
| Allows the network management station to |
| configure the Switch Management interface, |
| load new Switch |
| management processor firmware into their |
| respecive Flash memories, reset the Switch, and |
| test file transfers between the management |
| station and the Switch’s Ethernet port. |
Switch Mechanical |
|
Chassis Dimensions: | Refer to Figures |
Enclosure Types: | The chassis is shipped with four rubber feet |
| on the bottom for secure stacking. Cabinet |
| Mounting Brackets are also shipped with |
| the chassis. You may mount these brackets |
| on the front or back of the chassis for |
| mounting in a Standard |
| with either the chassis back or front facing |
| the front of the equipment rack. |
Chassis Support: | The chassis MUST be supported by a shelf |
| or rails when |
Chassis Weight: | 20 kg (45 lbs) maximum configuration |
Switch Electrical |
|
Power source loading: | 1.7 Amps maximum at 90 to 137 Vac |
| 0.9 Amps maximum at 180 to 265 Vac |
Each Power Supply: | 140 Watts |
Operating voltage: | 90 to 137 Vac; 47 to 63 Hz |
| 180 to 265 Vac; 47 to 63 Hz |
Input Fuse Type: | There are two input fuses. Each |
| fuse is a 4 Amp |
| Littelfuse P/N 218004 or equivalent |
GigWorks | ||
Installer's/User's Manual |