
Switch Utilities — Zoning
each zone is
Hard Zone Rules:
1.A Hard Zone is only valid if it is enabled.
2.Hard Zones apply only to single stage switch fabrics (one chassis).
3.There is a maximum of four Hard Zones
4.All ports in a physical group must be in the same Hard Zone. Rule 7 defines Physical groups.
5.Hard Zones may include multiple physical groups. Rule 7 defines Physical groups.
6.An individual port can only be in one Hard Zone.
7.Hard Zones must follow physical
The following
1,2 3,4 5,6 7,8
The following
1,2,3,4 5,6,7,8 9,10,11,12 13,14,15,16
a.Ports 1,2,3, and 4 in one zone, ports 5 and 6 in a second zone, and ports 7 and 8 in a third zone.
b.Ports 1,2,5,6,7 and 8 in one zone, ports 3 and 4 in a second zone.
a.Ports 1, 2, 3,4, 5, 6, 7, and 8 in one zone, ports 9, 10, 11, and 12 in a second zone, and ports 13, 14, 15, and 16 in a third zone.
b.Ports 1 through 12 in one zone, ports 13 through 16 in a second zone.
8.If any port on the chassis is defined as being in an enabled Hard Zone, all ports must be defined in enabled Hard Zones (No Hard Zone Orphans). A Hard Zone Orphan is defined as a port not defined in any enabled Hard Zone.
GigWorks | ||
Installer's/User's Manual |