![](/images/backgrounds/362544/362544-0375x1.png)
Door glass
Depending on the model, the oven door is equipped with
1.Use a screwdriver to remove the screws on the left and right sides.
2.Detach the coverings in the arrow directions
3.Remove the first sheet from the door.
01
4.Remove the second sheet from the door in the arrow direction.
02
03
03
02
01
01Support clip 1
02Support clip 2
03Support clip 3
5.Remove the third sheet from the door in the arrow direction.
6.Clean the glass with soapy water and a clean cloth.
7.When done, reinsert the sheets as follows:
•See the picture and locate the hinges. Insert sheet 3 below support clip 1, sheet 2 between support clip 1 and 2, and sheet 1 into support clip 3 in this order. Make sure the printed side of sheets is inserted inward.
CAUTION
To identify the correct side of the sheet, locate the “PYRO” mark on the corner of every sheet.
Correct direction:
8.After insert the sheet 2, press down the glass clips and check if they secure the glass sheet properly.
9.Follow steps
Maintenance
WARNING
To prevent heat leaks, make sure you propery reinsert the glass sheets.
English 39
|
| ||
|
| ||
|
|
|
|