Simrad ROBERTSON AP45 Optional equipment F200-40 Remote Control S9 Steering Lever, S9 Mounting

Page 5-26	Robertson AP45 Autopilot
	Installation

Optional equipment

F200-40 Remote Control

S9 Steering Lever

This unit is fixed to a mounting bracket, which is secured by four screws. F200-40 is connected to J3 on the control unit according to Fig. 5-27.

Fig. 5-27

F200-40/AP45 - Wiring diagram

Mounting (Fig. 5-28)

Fig. 5-28

S9 Mounting

For bulkhead mounting, use the 8 bushings enclosed with the unit. These are placed two and two against each other and the screws are put through them. Direct contact between S9 and a steel bulkhead is then avoided and corrosion is prevented. The cover plate can be turned 360 degrees for the most convenient position of cable outlet. For panel mounting use the two mounting brackets enclosed with the unit.

Electrical connection:

Connection to the AP45 Control Unit is made in accordance with Fig. 5-29.

The diagram in the cover plate shows the terminal connections in the S9 (Fig. 5-30).

For use together with AP45, four different operation alternatives can be selected by changing a resistor in S9.

Simrad Robertson AS

Egersund - Norway