Choose a Remote Extension to configure. After you have activated a Remote Extension, you must enter a phone number in order for the extension to be considered active and usable by the system.
Remote phone number:
Enter the phone number of the Remote Extension (note: no specific prefixes are required - put the number in just as though you were dialing it from a regular phone). You may use the following in the space provided: digits 0 – 9, space, comma, dash, # and *.
Last Name/First Name:
Enter the first and last name of the person associated to the extension. The last name is required if the person is to be included in the ‘Dial by Name’ directory listing used at the Auto Attendant level. The person using that extension must also record their name for the directory. Instructions for recording the name are listed in the interface.
Connect using:
Select the Line Hunt Group that TalkSwitch will use to connect to that Remote Extension. For example if you have an inexpensive long distance carrier setup for the lines in Hunt Group 84, you may want to use this Hunt Group for your long distance Remote Extensions.
2.0 | Configuring TalkSwitch |
19
