Talkswitch CTTS001021001 manual Connecting Devices to the Music and PA Jacks

To Attach a Single Line Corded or Cordless Telephone, Fax Machine or Answering Machine:

Connect your single line analog telephone or fax machine to one of TalkSwitch’s extension jacks E1 to E4 just as you would if you were plugging them into a standard telephone wall jack.

To Attach a Two-line Telephone:

Option #1 (Use it as one TalkSwitch extension.)

Disregard the telephone’s Line 2 jack (plug-in). Connect the telephone’s Line 1 plug-in to any one of TalkSwitch’s extension jacks. You will still be able to access both telephone lines in the same manner as if you were using a single line telephone attached to TalkSwitch.

Option #2 (Use it as two TalkSwitch extensions.)

You could use your two-line telephone as two separate TalkSwitch extensions. Connect the telephone’s Line 1 and Line 2 plug-ins to two separate extension jacks.

Most two-line phones have separate plug-ins for two incoming telephone lines (Line 1 and Line 2). If your two-line telephone does not have separate plug-ins, you can use a “Line 1/Line 2” line splitter to separate the two lines. Download the Quick Guide at www.talkswitch.com for more detailed examples on connecting multi-line phones.

To Attach an Internal or External Modem:

Simply plug the modem’s telephone cable into one of TalkSwitch’s extension jacks. Your modem is now a TalkSwitch extension and will be able to access all lines and take advantage of TalkSwitch’s call routing features.

If you don’t want to change your dial up settings for the modem, you will need to enable Direct Line Access for the extension associated to the modem. See section 2.3.1.4 for more details on configuring Direct Line Access.

1.4.3 Connecting Devices to the Music and PA Jacks

The Music jack is designed to support any audio source (CD player, radio, tape player, sound card etc.) for playing music or messages to callers while on hold. Simply connect the audio source via its headphone output to the Music jack. The Music jack requires a 1/8'' (3.5mm) phono connector. If you have more than one TalkSwitch connected to a LAN, you will need to provide audio to all the Music jacks on each TalkSwitch.

1.0 Installing TalkSwitch

5