152.0 Configuring TalkSwitch
Note: Only lines that are detected can be calibrated.
2.3.1.3 Line Hunt Groups
There are a total of 9 Line Hunt Groups for controlling outbound call line selections.
These Line Hunt Groups are used by the Local and Remote Extensions, and when
using the Call Bridge feature. Each Hunt Group can support several line choices and
will attempt to grab an available line in the order that they are listed (Lines to hunt)
for that Hunt group. These settings have no effect on incoming calls.
The default setup:
Hunt Group 9: selects any available line
Hunt Group 81: selects Line 1
Hunt Group 82: selects Line 2
First select a Line Hunt Group then name the group(s) if desired.
Under Set Line Hunt Group, select the lines you wish to add to the Hunt Group by
clicking the check boxes left of the line. Repeat this process for the other Hunt
Groups. Lines will be hunted in the order they are listed from top to bottom.