Pick up a telephone handset connected to the TalkSwitch and use the following keypad commands to record the Prompted Call Back Announced Message:

1)Press to enter command mode. If required, enter the password.

2)Next, enter the appropriate command as listed below. After each

command, press to confirm the entry. To record message: 65

To playback message: 75

Allow Call Bridge:

To allow Call Bridge after a Call Back has been accepted, check the Allow Call Bridge box. You may also restrict the Hunt Group access using Call Bridge from this Call Back by choosing the Hunt Group Access button.

The call back number shown will always be the last number TalkSwitch dialed in the last Prompted Call Back session.

2.0

Configuring TalkSwitch

55

Page 61
Image 61
Talkswitch CTTS001021001 manual Allow Call Bridge