Technics SX-PR54/M operating instructions Selecting an attribute

Sound

Part VI	Sound
Part Setting
Set the various sound attributes for each part.	3. Use the buttons below the display to adjust
Selecting an attribute	each attribute (explained in detail following).
	• The settings display is comprised of 5 pages. Use the
1. On the SOUND MENU display, select PART	PAGE buttons to switch pages.
	4. When you have completed adjusting all of the
SETTING.
2. Use the PART SELECT ∧ and ∨ buttons to	settings for one part, select another part and
	repeat the adjustment procedure as desired.
select the part.
	• The settings and effects of the PAN, EFFECT etc. may
	differ depending on the sound.

<PAGE 1>	TUNING:
	Use the TUNE ∧ and ∨ buttons to adjust the fine

tuning (−128 to +127).

• The ∨ button is used to lower the pitch, and the ∧ button to raise the pitch.

<PAGE 2>

SOUND:

Use the SOUND ∧ and ∨ buttons to select a sound.

•The buttons on the control panel may also be used to select a sound.

VOLUME:

Use the VOL ∧ and ∨ buttons to adjust the vol- ume (0 to 127).

PAN:

Use the PAN ∧ and ∨ buttons to adjust the ste- reo balance (L64–CENTER(CTR)–R63).

•At L64, the sound is completely to the left, at R63 com- pletely to the right. At CENTER, the sound is at the cen- ter. The display indicates the selected position.

•Even at the same numerical value, the stereo balance may differ slightly depending on the sound.

SUS PEDAL:

Use the SUSTAIN ∧ and ∨ buttons to adjust the length of the sustain (1-8). Use the ON/OFF but- tons to enable or disable the sustain effect, when the sustain pedal is depressed.

KEY SHIFT:

Use the KEY ∧ and ∨ buttons to specify the amount of key shift (−24 to +24).

•A value of 1 means a shift of one semi-tone. To raise (or lower) the pitch one octave, set the value to +12 (or −12).

•The ∨ button is used to lower the pitch, and the ∧ button to raise the pitch.

REVERB DEPTH:

Use the REVERB ∧ and ∨ buttons to adjust the depth of the REVERB (0 to 127).

DIGITAL EFFECT:

Use the DIG. EFFECT ON/OFF buttons to set the DIGITAL EFFECT to on or off.

CHORUS:

Use the CHORUS ON/OFF button to set the CHORUS to on or off. Use the ∧ and ∨ buttons to adjust the depth of the effect (0 to 127).

MULTI:

Use the MULTI ON/OFF button to set the MULTI EFFECT to on or off. Use the ∧ and ∨ buttons to adjust the depth of the effect (0 to 127).

<PAGE 3>

102

QQTG0701