Sound
Part VI | Sound |
Mixer
Use the MIXER display to visually adjust the major settings of each part. Use this display to make broad, general changes to the settings.
1.On the SOUND MENU display, select MIXER.
•The MIXER display consists of 5 pages. Use the PAGE buttons to switch among the pages.
•Each time the OTHER PARTS/TR button is pressed, the part that is displayed changes.
•Even at the same numerical value, the PAN and effects may differ depending on the sound.
•For some parts, such as the automatic accompaniment parts, the items that can be adjusted are limited.
2.Adjust each parameter. <PAGE 1>
SOUND:
Select SOUND. Use the buttons below the display to set the sound for the corresponding part.
•The buttons in the SOUND GROUP can also be used to select the sound.
PAN:
Select PAN. Use the buttons below the display to adjust the stereo balance of the corre- sponding part
VOLUME:
Select VOLUME. Use the buttons below the display to adjust the volume of the corre- sponding part (0 to 127).
•To mute a part, press both the corresponding balance buttons as the same time. To cancel the mute, press either balance button for the part.
<PAGE 2>
REVERB:
Select REVERB. Use the buttons below the display to set the level of the REVERB for the corresponding part (0 to 127).
MULTI:
Select MULTI. Use the buttons below the dis- play to set the MULTI EFFECT to ON or OFF for each part.
MULTI DEPTH:
Select MULTI DEPTH. Use the buttons below the display to adjust the depth of the MULTI EFFECT for the corresponding part (0 to 127).
<PAGE 3>
DIGITAL EFFECT:
Select DIGITAL EFF. Use the buttons below the display to set the DIGITAL EFFECT to ON or OFF for the corresponding part.
CHORUS:
Select CHORUS. Use the buttons below the display to set the CHORUS to ON or OFF for each part.
CHORUS DEPTH:
Select CHORUS DEPTH. Use the buttons below the display to set the depth of the CHO- RUS for the corresponding part (0 to 127).
<PAGE 4>
EQUALIZER HIGH:
Sound quality correction in the high range. Select EQUALIZER HI FC; use the buttons below the display to set the standard fre- quency. Select EQUALIZER HI GAIN; use the buttons below the display to set the ratio of change.
104
