Part IV | Composer |
Create a completely new rhythm
Clear the memories and compose a completely new rhythm from scratch.
• You can also use this method when copying a pattern from a preset rhythm or the SEQUENCER.
Prepare to record
1.On the COMPOSER MENU display, select a memory in which to record (RECORDING
MEMORY A, B, or C).
• The display looks similar to the following.
5.Press the YES button.
• All the data for the selected pattern is erased.
6.Press the MEASURE SETTING button.
Composer
2.Use the buttons below the display to select the
pattern you want to create.
•If the MEM CLR button is pressed, all the current con- tents of the MEMORY (A/B/C) are erased (a confirmation display appears).
•You can press the NAMING button and assign a name to the MEMORY.
•To assign a name to each VARIATION, press the VARI button and select a number.
3.On the RECORD MEMORY display, press the
OK button.
• The display looks similar to the following.
4.Press the CLEAR THE ENTIRE PATTERN
button.
• The display looks similar to the following.
7.Use the MEASURE ∧ and ∨ buttons to spec- ify the number of measures in your new rhythm pattern (1 to 16).
8.Use the TIME SIGNATURE ∧ and ∨ buttons to specify the meter of the pattern (1/4 to
8/4).
•When the settings for the MEASURE and TIME SIGNA- TURE of the INTRO or ENDING patterns are changed, the Maj and Min settings change at the same time.
9.Press the OK button.
10.Press the EXIT button.
82