![](/images/new-backgrounds/1199250/199250167x1.webp)
Part IV | Composer |
QUANTIZE: | 6. When you have finished recording the rhythm, |
Smooth out any unevenness in the timing of | |
your performance. | turn off the PROGRAM MENUS button. |
•Before recording, select the note value for the desired quantize level. (The quantize level is shown on the dis- play as QUANTIZE=.)
KEY IN CHORD MODIFY <PAGE 2/2> (except for INTRO, ENDING, DRUMS):
Use the GROUP and TYPE ∧ and ∨ buttons to select the type of pattern progression.
•This setting is for the sound that is going to be recorded from this time.
5.Use the buttons below the display to switch to a different recording part, and proceed to record each part in turn.
Chord Modify Change
For data that has already been recorded, you can select the type of pattern progression for the bass and accomp parts.
•This function cannot be used for the INTRO and ENDING patterns.
1. On the RECORDING display, press the | • If a progression type for which the note name is displayed | |
CHORD MODIFY CHANGE button. | (in C key) was selected for the chord group, played notes | |
• The display looks similar to the following. | which are not displayed are changed to notes which are | |
displayed. | ||
|
2.Use the PART ▲ and ▼ buttons to select the part you wish to set.
3.Use the GROUP and MODIFY TYPE ∧ and ∨ buttons to select the corresponding progres- sion type.
4.Use the FUNCTION ∧ and ∨ buttons to enable or disable the function.
KEEP: No change.
CHANGE: The change is enabled.
5.When you have finished making the settings for each part, press the OK button.
6.Press the EXIT button.
Composer
Part Setting
You can make detailed settings for each part. |
|
1. On the REALTIME RECORDING display, | <PAGE 1> |
press the PART SETTING button. |
|
•The settings comprise 3 pages of the display. Use the PAGE buttons to switch pages.
2.Use the PART ▲ and ▼ buttons to select a part.
3.Use the ∧ and ∨ buttons to set the corre- sponding item.
84