Technics SX-PR54/M operating instructions Store a chord progression

Part III	Sequencer
Correcting the data	Sound data

1.In the STEP RECORD mode, specify the track you wish to correct.

2.Use the MEAS buttons to go to the measure

you wish to modify. Use the CURSOR buttons to move the cursor to the point ( ∗ ) you wish

to edit.

•The data stored at that point is shown on the display.

•When multiple data is stored at one point, different data is displayed in order each time a CURSOR button is pressed. When a chord is recorded, a different note in the chord is displayed each time a CURSOR button is pressed.

3.Correct the data.

The name of the sound is displayed. Change the sound as desired (the sound setting display is interposed on the current display).

Control data

The name of the function is displayed. Change the data as desired.

•Press the ERS button to erase the data which is dis- played.

•You can also correct data which was stored in the REAL- TIME RECORD mode.

•Performance (NOTE) data can be recorded or edited on a piano roll display, and there is also a specialized dis- play for recording and editing the DRUMS part data. (Refer to page 73 or 74.)

There are three types of data:

Performance data

NOTE data (note pitch) and VEL data (how hard the key was played) and LEN data (1 = 1/96 of a quarter note [ q ]) are displayed. Use the relevant buttons to correct the data as desired.

Store a chord progression

Store the chord progression for the AUTO PLAY CHORD in the track for the CHORD part. Then, when the AUTO PLAY CHORD is used during playback, even if you do not specify the chords with your left hand, the chords change automatically.

•The chord length is specified with the CHORD STEP RECORD keys on the keyboard.

DELETE &

eq

q . h

Correction keys

Move back one step.  Move forward one step.

h . w

Repeat key

Press to end the chord-storing proce- dure and to specify automatic repeat playback of the stored progression.

Sequencer

Note value keys

wWhole note

h. Dotted half-note

hHalf-note

q. Dotted quarter-note

qQuarter-note

e Eighth-note

End key

Press after the whole chord progres- sion has been stored.

DELETE key

DELETE Press to erase data.

•To erase all the data from the current track, while pressing the DELETE key, press the End key

( ).

Reset key

& Press to begin storing from the begin- ning.

67

QQTG0701