
Part III | Sequencer |
Inserting DRUMS data
You can also store DRUMS data on this display.
1.Specify the point where the new note data will be stored.
2.Use the VEL ∧ and ∨ buttons to specify the velocity (how hard the key is played).
3.Press the ENTER button to store the data.
•Instead of the ENTER button, you can store data (includ- ing velocity data) by playing the keyboard. In this case, the instrument is that specified on the display, regardless of which key is played.
4.Repeat steps 1 to 3 to input more DRUMS data.
CYCLE PLAY
You can aurally check the data you are editing by accessing the CYCLE PLAY display from the DRUM EDIT display.
•The procedure is the same as for NOTE EDIT.
•If you wish other tracks to be played back, they should be selected beforehand on the SEQUENCER PLAY display. (Refer to page 61.)
Copy and paste the recorded data
You can copy and paste specific portions of the recorded data.
Select the function
1.On the SEQ MENU display, use the SONG SELECT ∧ and ∨ buttons to select the number
of the song. Then select COPY & PASTE.
•The display looks similar to the following.
2.On the COPY & PASTE display, select a func- tion.
3.Perform the editing procedures. (See below.)
•During the editing procedure, if the indicator for the TEMPO/PROGRAM is lit, you can use the TEMPO/PRO- GRAM dial for the editing function.
SONG COPY
Copy all the recording data of a song to a spe- cific song memory.
1.On the FROM side, use the SONG ∧ and ∨ buttons to select the song number you wish to copy from.
2.On the TO side, use the SONG ∧ and ∨ but- tons to select the song number to copy to.
3.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
TRACK COPY
Copy the recorded data from specific tracks of a song.
1. Specify the track you wish to copy from.
• On the FROM side, use the SONG ∧ and ∨ buttons and TRACK ∧ and ∨ buttons to specify a track.
• If ALL is selected, all the tracks of the specified song number will be copied.
2.Specify the track you wish to copy to (TO side).
3.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
Sequencer
75