Technics SX-PR54/M operating instructions Fade In/Fade Out, Fade OUT, Fade SET

Part II Playing the rhythm

Fade In/Fade Out

FADE	RHYTHM GROUP	SOUND GROUP
DEMO		+
		PANEL MEMORY

Add interest to your performance by starting a part with a fade-in or ending it with a fade-out.

Playing the rhythm

FADE IN

At the beginning of the song, the volume of each part rises slowly.

1.Set up the panel settings for your perform- ance.

2.Turn on the FADE IN button.

FADE

IN OUT

•The indicator flashes. In this condition, the volumes for all parts change to 0 and no sound is produced from this instrument until the FADE IN is turned off or until step 3 is executed.

3.Play the keyboard or press the START/STOP

button.

•The volume slowly builds to its preset level.

•For the fade-in effect for a rhythm part or when playing back a SEQUENCER performance, turn on the FADE IN button before pressing the START/STOP button.

•At the end of the fade-in, the FADE IN indicator goes out.

•During the fade-in, FADE IN is shown in the upper right part of the normal display.

FADE OUT

At the end of the song, the volume of each part gradually fades to nothing.

1.Start the performance.

2.Turn on the FADE OUT button at the point you want the fade-out to start.

FADE

IN OUT

•The volumes of all the parts slowly fade to 0.

•The indicator flashes to show that fade-out is completed, and then goes out. The volumes for all parts return to their specified settings.

•If you wish to interrupt the fade-out, press the FADE OUT button to turn it off.

FADE SET

Adjust the settings for the FADE IN and FADE OUT.

1.Press and hold the FADE IN or FADE OUT button for a few seconds.

FADE

IN OUT

•The display looks similar to the following.

2.Use the ▲ and ▼ buttons to select the item. Use the ∧ and ∨ buttons to change the set- ting.

FADE IN

Time:

Specify the time elapsed between 0 volume to the set volume (1 measure to 16 mea- sure).

FADE OUT

Time:

Specify the time elapsed between the set volume and 0 volume (1 measure to 16 measure).

Auto Reset:

Specify whether the volume of each part automatically returns to its specified setting (ON, OFF).

Rhythm Auto stop:

Specify whether the rhythm turns off after fade-out is completed (ON, OFF).

SEQ Auto stop:

Specify whether the SEQUENCER play- back automatically stops after fade-out is completed (ON, OFF).

•The display returns to the previous display a few seconds after you have changed the settings.

•You can also access this display from the CONTROL MENU display. (Refer to page 120.)

48

QQTG0701