Part XI

MIDI

Mode Setting

Initialize the settings for when the NX SOUND or GM LEVEL 2 mode is ON.

1.On the MIDI MENU display, select MODE

SETTING.

• The display looks similar to the following.

2.Select the mode.

There are two modes for GM LEVEL 2 depending on the parts to use.

The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

Input/output Setting

Make the settings which determine how various performance data is treated during data transmission and reception.

MIDI

1.On the MIDI MENU display, select

INPUT/OUTPUT SETTING.

• The display looks similar to the following.

2.Use the ▲ and ▼ buttons to select the item.

RIGHT 1 INPUT CONDUCTOR:

When data for the RIGHT 1 part is received, the CONDUCTOR determines which part it is used for.

DIRECT:

When data for the RIGHT 1 part is received, it is treated as RIGHT 1 data, and perform- ance data for all parts is received on their respective basic channels.

AUTO PLAY CHORD INPUT

ON: Input data for the ACCOMP, BASS, APC and CHORD parts is received.

OFF: Data for the above parts is not received.

MIDI channels should be assigned to the above parts before exchanging data.

VELOCITY INPUT DIRECT:

The VELOCITY value of received NOTE ON data is treated as is.

OFFSET:

The VELOCITY value of received NOTE ON data is offset (−50 to 50).

130

Select VELOCITY OFFSET VALUE. Use the and buttons to change the value.

All the values are offset from the current value by the fixed amount.

The upper (127) and lower (1) limits cannot be exceeded.

FIX:

The VELOCITY value of all received NOTE ON data is set to a fixed value. (1 to 127)

Select VELOCITY FIXED VALUE. Use the and buttons to change the value.

TECHNI-CHORD OUTPUT

ON: Keyboard notes generated by the TECHNI-CHORDfunction are also trans- mitted.

OFF: Only key note data of the pressed keys is transmitted.

TRANSPOSE OUTPUT

ON: The note data of the transposed notes is transmitted.

OFF: The note data of the played keys is transmitted.

DRUM PATTERN OUTPUT

ON: Data from the DRUMS part is transmitted.

OFF: Data from the DRUMS part is not trans- mitted.

AUTO PLAY CHORD OUTPUT

ON: The data for the ACCOMP and BASS parts is transmitted.

OFF: The data for the above parts is not trans- mitted.

MIDI channels should be assigned to the above parts before exchanging data.

QQTG0701

Page 129
Image 129
Technics SX-PR54/M operating instructions Mode Setting, Input/output Setting