Initialize
This instrument has many settable functions and storable memories. However, you can return the settings and memory to the
INITIAL
1. Press the PROGRAM MENUS button to turn it | 4. Use the ▲ and ▼ buttons to select the desired | |
on. | type of initialization. | |
PROGRAM | • PERFORMANCE includes all the items which are listed | |
below it. | ||
MENUS |
• The display changes to the following.
2.Select CONTROL.
• The display looks similar to the following.
3.Select INITIAL.
• This display changes to the following.
5.Press the OK button.
•The display changes to the confirmation display. Press the YES button if you wish to execute the initialization. Press the NO button if you wish to cancel the procedure.
•Initialization begins. When initialization is completed, “COMPLETED!” is shown on the display and the Key- board returns to the normal performance mode.
•The USER MIDI and FAVORITES are not initialized by this procedure.
You can also reset all the PERFORMANCE items with the following procedure:
Turn off the power to this instrument once. Then, while pressing the three lower left but- tons in the RHYTHM GROUP section (8BEAT, 16BEAT and USA) at the same time, turn the power on again.
Power on settings
When the POWER button of this instrument is turned on, the settings below are automatically set to those suitable for piano performance.
Sound | GRAND PIANO (CONCERT) |
CONDUCTOR | RIGHT 1 |
TRANSPOSE | C |
SYNCHRO & BREAK | Off |
AUTO PLAY CHORD | Off |
All PART SETTING items for the RIGHT 1 part | Appropriate values |
PEDAL SETTING | SOFT |
•When you turn the power on, you can recall all the settings which were in effect at the time you turned the instrument off: while depressing the sustain (right) pedal, turn on the power. (However, this function only works for a few tens of minutes after the power is turned off.)
