Part III | Sequencer |
4. Use the ERASE DATA ∧ and ∨ buttons to | MEASURE INSERT |
specify the type of data to be erased. | Insert specified measures at a specified point. |
|
ALL:
All data is erased. NOTE:
Only note data is erased.
CONTROL:
Only control data (volume, effect and other panel settings as well as selection changes) is erased.
5.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
•The length of the performance accordingly increases by the number of inserted measures.
1.Specify the measures you wish to copy from
the source track.
•On the FROM side, specify the settings with the corre- sponding buttons.
MEASURE DELETE
Delete specified measures from a track.
•The length of the performance accordingly decreases by the number of deleted measures.
1.Use the TRACK ∧ and ∨ buttons to select the
track from which measures are to be deleted.
•This function does not work for the CHORD or RHYTHM track in which the repeat function has been stored.
•If ALL is selected, the specified measures are deleted from all the tracks at one time.
2.Use the FIRST MEAS ∧ and ∨ buttons, to specify the first measure to delete.
3.Use the LAST MEAS ∧ and ∨ buttons to specify the last measure to delete.
4.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
TRACK:
Specify the track number you wish to copy the measures from.
•This function does not work for the CHORD or RHYTHM track in which the repeat function has been stored.
•If ALL is selected, the measures are inserted in all tracks at the same time.
FIRST MEASURE:
Specify the first measure to copy.
LAST MEASURE:
Specify the last measure to copy.
2.Specify where you wish to insert the selected
measures.
•On the TO side, specify the settings with the correspond- ing buttons.
TRACK:
Specify the track number.
•Measures from the CHORD, RHYTHM or CONTROL track can only be inserted in the same track.
START MEASURE:
Specify the start point to insert the selected measures.
REPEAT:
Specify the number of times the selected measures are to be repeated.
3.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
•Note that if the END command is included in the source data, it is also inserted. Any data following the END com- mand is not inserted.
Sequencer
77
