Part II

Playing the rhythm

Panel Memory

FADE

RHYTHM GROUP

SOUND GROUP

 

DEMO

 

+

 

 

 

PANEL MEMORY

PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.

How to store the panel settings

• You can use the bank names on PAGE 1/2 to select the

 

 

bank.

Playing the rhythm

By storing all the panel settings you use for a song in the same bank, for example, you can switch from one panel setup to the next in a flash.

1.Set up the desired panel settings (sounds, vol- umes, etc.)

2.Use the BANK button to select a bank (A, B, C).

C

A B

BANK SET

Lighting up both the A and B indicators enables C to be selected.

3.With the SET button held down, press one of the numbered buttons of the PANEL MEMORY (1 to 8).

Assign a name to the bank/memory

You can assign names to the banks and memo- ries.

1.Select one of the numbered buttons marked PANEL MEMORY and hold it down for sev- eral seconds.

2.Press the BANK NAMING button to assign a name to the bank, or the MEMORY NAMING

button for the memory.

The display looks similar to the following.

C

A B

P.MEM 5-8

BANK

SET

1 / 5

2 / 6

3 / 7

4 / 8

PANEL MEMORY

Turning the P.MEM 5-8button ON enables the selection of panel settings for numbers 5 to 8.

The panel settings are now stored in the specified bank and number.

BANK VIEW

Select one of the numbered buttons marked PANEL MEMORY and hold it down for several seconds to check the 8 memory names of the selected bank.

3.Use the buttons below the display to assign a

name.

Set the character input position with the POSITION but- tons, select the characters with the alphanumeric buttons and repeat name assignment.

Switch from upper to lower case letters with the ABC, abc button.

Use the !#$ button to switch to the symbols character set.

Press the INS button to enter a space at the cursor posi- tion.

Press the DEL button to erase the character at the cursor position.

Press the CLR button to erase the entire name.

Press the →← button to center the name.

4.When you have finished assigning the name, press the OK button.

You can use the BANK and buttons to view other banks.

52

QQTG0701

Page 52
Image 52
Technics SX-PR54/M operating instructions How to store the panel settings, Assign a name to the bank/memory, Bank View