
Part VI | Sound |
EQ LOW:
Use the EQ LOW FC, GAIN ∧ and ∨ buttons to adjust the sound quality in the lower range.
EQ HIGH:
Use the EQ HIGH FC, GAIN ∧ and ∨ buttons to adjust the sound quality in the upper range.
GLIDE PEDAL:
Use the GLIDE ON/OFF buttons to enable or dis- able the glide effect, if it has been assigned to the pedal.
• For pedal settings, refer to page 120.
ORIGINAL TUNING:
Use the ORIG ON/OFF button to enable or dis- able the tuning for each sound.
• For details about ORIGINAL TUNING, refer to page 106.
<PAGE 4>
FILTER RESONANCE:
Use the RESO ∧ and ∨ buttons to adjust the amount of resonance (0 to 127).
ATTACK TIME:
Use the ATT ∧ and ∨ buttons to specify the attack time (0 to 127).
DECAY TIME:
Use the DEC ∧ and ∨ buttons to specify the decay time (0 to 127).
RELEASE TIME:
Use the REL ∧ and ∨ buttons to specify the release time (0 to 127).
BRIGHTNESS:
Use the BRI ∧ and ∨ buttons to adjust the bright- ness of the sound (0 to 127).
VIBRATO RATE:
Use the RATE ∧ and ∨ buttons to specify the vibrato speed (0 to 127).
VIBRATO DEPTH:
Use the DEP ∧ and ∨ buttons to specify the vibrato depth (0 to 127).
VIBRATO DELAY:
Use the DEL ∧ and ∨ buttons to specify the time interval from when the keys are played until the vibrato starts (0 to 127).
• The center value is 64 (±0).
<PAGE 5>
MONO/POLY MODE:
Use the MONO/POLY ∧ and ∨ buttons to select the output mode.
PORTAMENTO:
Use the PORTAMENTO ON/OFF buttons to enable or disable the portamento function. (Por- tamento is a continuous gliding movement from one tone to another.)
Use the ∧ and ∨ buttons to specify the porta- mento time.
• PORTAMENTO does not function for the POLY MODE.
MODULATION SENSITIVITY:
Use the MOD SENS ∧ and ∨ buttons to adjust the sensitivity of the MODULATION (when MIDI data is recieved).
•Use the MSB ∧ and ∨ buttons
BEND RANGE:
Use the BEND RANGE ∧ and ∨ buttons to spec- ify the PITCH BEND range (0 to 12). Increments are in
•The higher the number, the greater the change in pitch when PITCH BEND data is received as MIDI data.
103