Part IV | Composer |
PITCH POINT:
The pitch at which the pattern progression sound is lowered by one octave.
•When the root note of the specified chord is higher than the set pitch point, the pitch of that part is automatically lowered by one octave, thus avoiding an unnaturally high accompaniment pitch.
•This is effective only for the part for which the Melody group was selected in CHORD MODIFY CHANGE.
SOUND:
Use the panel buttons to select the sound.
DIGI EFF:
Set the DIGITAL EFFECT to on or off.
•(SOUND) is the initialized setting of the sound.
<PAGE 2>
REV:
Depth of the REVERB (0 to 127).
CHO:
Depth of the CHORUS (0 to 127).
BEND RANGE:
Adjust the range of pitch change when the PITCH BEND data is received (0 to 12).
<PAGE 3>
Sound correction in the high range.
•Use the FC ∧ and ∨ buttons to adjust the standard fre- quency. Use the GAIN ∧ and ∨ buttons to set the ratio of change.
BALANCE:
Adjust the volume balance.
PAN:
Adjust the stereo balance of each part (LEFT 64 – CENTER – RIGHT 63).
•At “LEFT 64”, the sound is all the way to the left, at “RIGHT 63” all the way to the right. The center point is
CENTER.
EQ-Low:
Sound correction in the low range.
•Use the FC ∧ and ∨ buttons to adjust the standard fre- quency. Use the GAIN ∧ and ∨ buttons to set the ratio of change.
Playback
1.In the RHYTHM GROUP section, press the MEMORY button.
RHYTHM GROUP
|
| FUNK & |
|
|
| BALLROOM |
METRONOME POP | ROCK | SOUL | DISCO | POP BALLAD | BALLAD | & SHOW |
|
|
| WALTZ | JAZZ & | LATIN & |
|
8 BEAT | 16 BEAT | USA | & TRAD | SWING | WORLD | MEMORY |
|
|
|
|
|
| LOAD |
•The display looks similar to the following.
2.Select the desired memory (A/B/C).
3.Use the VARIATION buttons to select a varia- tion.
4.Press the START/STOP button.
•The DRUMS part begins to play back.
•The BASS and ACCOMP parts are played back when you use the AUTO PLAY CHORD.
Composer
85
