Repeat-Sequence-of-Channels Mode

ADC12 Operation

A sequence of channels is sampled and converted repeatedly. The ADC results are written to the conversion memories starting with the ADC12MEMx defined by the CSTARTADDx bits. The sequence ends after the measurement of the channel with a set EOS bit and the next trigger signal re-starts the sequence. Figure 17−9 shows the repeat-sequence-of-channels mode.

Figure 17−9. Repeat-Sequence-of-Channels Mode

CONSEQx = 11	ADC12
	off
	ADC12ON = 1
	ENC =

x = CSTARTADDx

Wait for Enable

ENC =

SHSx = 0

and	ENC =
and
ENC = 1 or

and	Wait for Trigger
ADC12SC =

SAMPCON =

SAMPCON = 1

ENC = 0

and

EOS.x = 1

Sample, Input

Channel Defined in

ADC12MCTLx

SAMPCON =

If EOS.x = 1 then x =

CSTARTADDx

else {if x < 15 then x = x + 1 else

x = 0}

If EOS.x = 1 then x =

CSTARTADDx

else {if x < 15 then x = x + 1 else

x = 0}

MSC = 1

and

SHP = 1

and

(ENC = 1

EOS.x = 0)

12 x ADC12CLK

Convert

1 x ADC12CLK Conversion Completed,

Result Stored Into

ADC12MEMx,

ADC12IFG.x is Set

(MSC = 0

SHP = 0)

and

(ENC = 1

EOS.x = 0)

x = pointer to ADC12MCTLx

17-14 ADC12

MSP430x1xx specifications

The Texas Instruments MSP430x1xx series is a family of ultra-low-power microcontrollers that are highly regarded in the embedded systems community for their versatility and performance. Designed for applications ranging from portable instrumentation to low-power industrial devices, the MSP430x1xx combines flexibility and efficiency with advanced features tailored for energy-sensitive applications.

One of the standout characteristics of the MSP430x1xx is its ultra-low-power operation. This series offers several low-power modes that can significantly extend battery life in portable devices. The microcontroller can be in active mode, low-power mode, or even in a deep sleep state, allowing developers to optimize power consumption based on the application's requirements. In fact, some configurations can operate at just a few microamps, making it ideal for battery-operated devices.

Another key feature is the 16-bit RISC architecture that provides powerful processing capabilities while maintaining a low power profile. The MSP430x1xx series supports a maximum clock speed of 16 MHz, allowing for efficient task execution while consuming minimal energy. This architecture ensures that programs run smoothly while the microcontroller remains energy efficient.

The MSP430x1xx is equipped with various integrated peripherals, including analog-to-digital converters (ADCs), timers, and communication interfaces like UART, SPI, and I2C. The inclusion of a powerful ADC enables the microcontroller to handle sensor readings with high accuracy, making it suitable for applications like environmental monitoring and medical devices. The integrated timers provide essential functionality for real-time applications, allowing for event-driven programming and precise timing control.

Memory options in the MSP430x1xx series are also robust, with configurations offering flash memory sizes from 1 KB to 64 KB. This flexibility allows developers to choose the optimal memory size for their specific applications, accommodating a wide range of requirements.

Additionally, the MSP430x1xx microcontrollers are designed with a wide operating voltage range, typically from 1.8V to 3.6V, making them compatible with various power sources and further enhancing their usability in diverse applications.

In summary, the Texas Instruments MSP430x1xx series of microcontrollers is an excellent choice for developers seeking low-power, high-performance solutions for embedded applications. With an efficient architecture, a rich set of peripherals, and flexible memory options, these microcontrollers are positioned to meet the growing demands of modern electronic designs, particularly in battery-powered and energy-sensitive applications.

Texas Instruments MSP430x1xx manual Repeat-Sequence-of-Channels Mode

Models: MSP430x1xx