Tables 7-3
8307TABL.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 12:26 PM Printed: 02/19/01 1:36
PM Page 3 of 6
To display the TABLE SETUP screen, press y [TBLSET].
TblStart (table start) defines the initial value for the
independent variable. TblStart applies only when the
independent variable is generated automatically (when
Indpnt: Auto is selected).
@Tbl (table step) defines the increment for the independent
variable.
Note: In Seq mode, both TblStart and @Tbl must be integers.
Selections Table Characteristics
Indpnt: Auto
Depend: Auto Values are displayed automatically in both
the independent-variable column and in all
dependent-variable columns.
Indpnt: Ask
Depend: Auto The table is empty; when you enter a value
for the independent variable, all
correspondin
g
dependent-variable values
are calculated and displayed automatically.
Indpnt: Auto
Depend: Ask Values are displayed automatically for the
independent variable; to
g
enerate a value
for a dependent variable, move the cursor
to that cell and press Í.
Indpnt: Ask
Depend: Ask The table is empty; enter values for the
independent variable; to
g
enerate a value
for a dependent variable, move the cursor
to that cell and press Í.
To store a value to TblStart, @Tbl, or TblZnput from the
home screen or a program, select the variable name from
the VARS TABLE secondary menu. TblZnput is a list of
independent-variable values in the current table.
When you press y [TBLSET] in the program editor, you
can select IndpntAuto, IndpntAsk, DependAuto, and
DependAsk.
Setting Up the TableTABLE SETUP
Screen
TblStart, @Tbl
Indpnt: Auto,
Indpnt: Ask,
Depend: Auto,
Depend: Ask
Setting Up the
Table from the
Home Screen or
a Program