12-12 Statistics
8312STAT.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 12:42 PM Printed: 02/19/01 1:37
PM Page 12 of 38
To create a name in the stat list editor, follow these steps.
1. Follow step 1 on page 12.11 to display the Name=
prompt.
2. Press [letter from A to Z or
q
] to enter the first letter of
the name. The first character cannot be a number.
3. Enter zero to four letters, q, or numbers to complete the
new user-created list name. List names can be one to
five characters long.
4. Press Í or † to store the list name in the current
column of the stat list editor. The list name becomes an
item on the LIST NAMES menu (Chapter 11).
To remove a list from the stat list editor, move the cursor
onto the list name and then press {. The list is not deleted
from memory; it is only removed from the stat list editor.
Note: To delete a list name from memory, use the MEMORY
DELETE:List selection screen (Chapter 18).
You can remove all user-created lists from the stat list
editor and restore list names L1 through L6 to columns 1
through 6 in either of two ways.
• Use SetUpEditor with no arguments (page 12.21).
• Reset all memory (Chapter 18).
You can clear all elements from a list in any of five ways.
• Use ClrList to clear specified lists (page 12.20).
• In the stat list editor, press } to move the cursor onto a
list name, and then press ‘ Í.
• In the stat list editor, move the cursor onto each
element, and then press { one by one.
• On the home screen or in the program editor, enter
0!dim(listname) to set the dimension of listname to 0
(Chapter 11).
• Use ClrAllLists to clear all lists in memory (Chapter 18).
Creating a Name
in the Stat List
Editor
Removing a List
from the Stat List
Editor
Removing All
Lists and
Restoring L1
through L6
Clearing All
Elements from a
List