Lists 11-3
8311LIST.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 1:21 PM Printed: 02/19/01 1:37 PM
Page 3 of 18
The TI-83 has six list names in memory: L1, L2, L3, L4, L5,
and L6. The list names L1 through L6 are on the keyboard
above the numeric keys À through ¸. To paste one of
these names to a valid screen, press y, and then press
the appropriate key. L1 through L6 are stored in stat list
editor columns 1 through 6 when you reset memory.
To create a list name on the home screen, follow these steps.
1. Press y [ { ], enter one or more list elements, and then
press y [ } ]. Separate list elements with commas. List
elements can be real numbers, complex numbers, or
expressions.
2. Press ¿.
3. Press ƒ [letter from A to Z or
q
] to enter the first
letter of the name.
4. Enter zero to four letters, q, or numbers to complete the
name.
5. Press Í. The list is displayed on the next line. The
list name and its elements are stored in memory. The
list name becomes an item on the LIST NAMES menu.
Note: If you want to view a user-created list in the stat list editor,
you must store it in the stat list editor (Chapter 12).
You also can create a list name in these four places.
At the Name= prompt in the stat list editor
At an Xlist:, Ylist:, or Data List: prompt in the stat plot
editor
At a List:, List1:, List2:, Freq:, Freq1:, Freq2:, XList:, or
YList: prompt in the inferential stat editors
On the home screen using SetUpEditor
You can create as many list names as your TI-83 memory
has space to store.
Naming Lists
Using TI-83 List
Names L1
through L6
Creating a List
Name on the
Home Screen