19-4 Communication Link
8319LINK.DOC TI-83 Intl English, Chap 19 Bob Fedorisko Revised: 02/19/01 1:24 PM Printed: 02/19/01 1:40 PM
Page 4 of 10
To display the LINK SEND menu, press y [LINK].
SEND RECEIVE
1:All+... Displays all items selected.
2:AllN... Displays all items deselected.
3:Prgm... Displays all programs names.
4:List... Displays all list names.
5:Lists to TI82... Displays list names L1 through L6.
6:GDB... Displays all graph databases.
7:Pic... Displays all picture data types.
8:Matrix... Displays all matrix data types.
9:Real... Displays all real variables.
0:Complex... Displays all complex variables.
A:Y-Vars... Displays all Y= variables.
B:String... Displays all string variables.
C:Back Up... Selects all for backup to TI-83.
When you select an item on the LINK SEND menu, the
corresponding SELECT screen is displayed.
Note: Each SELECT screen, except All+ SELECT, is displayed
initially with no data selected.
To select items to send on the sending unit, follow these
steps.
1. Press y [LINK] to display the LINK SEND menu.
2. Select the menu item that describes the data type to
send. The corresponding SELECT screen is displayed.
3. Press } and † to move the selection cursor ( 4 ) to an
item you want to select or deselect.
4. Press Í to select or deselect the item. Selected
names are marked with a 0.
5. Repeat steps 3 and 4 to select or deselect additional items.
Selecting Items to Send
LINK SEND Menu
Selecting Items
to Send